Duration 8:42

Road clipless pedals: what worked for me in getting used to them and tips on cleats position

4 513 watched
0
258
Published 27 Apr 2021

Switching to clipless pedals might be tricky at first, but very rewarding once you get used to them. Brief description on my experience with road Shimano pedals R550 and how I set up the cleats position. Maybe I am stating the obvious as I describe the clipping and un clipping technique, this is just about I got used to clipless pedals and tried different set up for the cleats. In the end the transition from flat pedals to clipless is not that hard and the enjoyment is well worth the switch. Thank you very much for watching! #cycling #bikefit #shimano #pedals #cliplesspedals

Category

Show more

Comments - 51
  • @
    @stuartfreedman68543 years ago When i walk, my right foot tends to point outward a little. It is important to pay attention to and follow your natural foot position. When a shop placed . ...Expand 6
  • @
    @ilonabrandt-tom4542 years ago Thank you. I am just now getting used to theinstruction is excellent.
  • @
    @HomiesOfMarslast year Just installed some clipless pedals today. I spent a good few months with the bike without them to learn how to always be in balance on the bike as its i think the biggest tip here is always using one side to stop on, and be carefuly to not tip over to the other side when you start off again! Note: i already have a gash in my shin lol. ...Expand
  • @
    @kwameakom26253 years ago Thanks for the advice federico, i met you a few days ago, funilly enough the last few days i have been researching getting clipless myself for better power . ...Expand 1
  • @
    @CTINF3 years ago Congratulations for the channel and keep up with the great work. Im a new subscriber, greetings from california. 1
  • @
    @pcmjpcmj68543 years ago Good video and advice. When i started cycling again after a few decades off the bike things had changed dramatically. I bought the whole of bike, helmet, clothing, tools, saddle, shoes, pedals, cleats etc from a well known bike shop. I think it contained a lot of end of line items as it seemed quite a good deal. People told me it would take some time to get used to clipping in and out of the pedals. For the first few weeks i was falling every time i had to stop. Once i was clipped in i could not get my foot out of the pedal despite backing off the tension in the pedal. Eventually after many cuts, bruises and scrapes i realised that the cleats and pedal were not compatable with each other! Got some different cleats and bravo, everything was fine. The bike shop apologised but i could have been seriously injured. ...Expand
  • @
    @trevorhawk20003 years ago Thanks for the advice, i have been riding my cyclecross bike with mtb spd cleats for the past couple of years but now have a new bike on order so going . ...Expand
  • @
    @jralicea62993 years ago Another great video, content and excellent explanation!
  • @
    @zennor_man3 years ago Thanks federico. It took me 3 embarrassing topples before i became accustomed to clipless pedals (i' m a slow learner) i use the same procedure as . ...Expand
  • @
    @millerprj3 years ago Being new to clipless myself, i would suggest practicing on both sides as much as possible. Only because i found myself tipping to my not usual side and . ...Expand 2
  • @
    @tonymammone16533 years ago Thank you federico. I have the same pedals and agree, i hear there isnt much difference to upgrade to the 105s to save 10 grams each side. 1
  • @
    @davidabbs44593 years ago Im used to spds on my gravel bike, not ridden on road pedals but i imagine its pretty much the same overall, i use them when i turbo train and the power transfer difference is noticeable.
  • @
    @keeksputels18513 years ago I' ve never used road cleats for road bikes as i like my shoes to fit my gravel and mtb. Plus its much easier to clip in a standing start sprint as . ...Expand
  • @
    @jimbrittain4023 years ago I find that all of us, when we first get the clipless pedals, have the occasions when we go over because we" clip out" it' s part of the learning; it happens to all of us. And the injury is almost always more to our dignity than it is to our body. I' m exceptionally klutzy, and still manage to go over every two or three years or so; my more coordinated and graceful associates and club members have gotten past that experience. ...Expand
  • @
    @emailForDye3 years ago I remember you talking about circular stroke on the bike in another video and now i' ve come across this video, which will complement that video very i don' t use the shimano system, but rather the look keo system. Look also uses colour coding, but i' m considering something and i would like your opinion on this. I have my cleats in a very good position at the moment, and i' m using the equivalent of shimano' s yellow.
    here are the angles of freedom: 0, 4, 5 or 9 (black, grey or red)lt; i use red
    i feel that the amount of effort to get out of the cleats is high at times and i' m planning on testing the grey ones soon, which should allow me to unclip a little bit sooner. I fear the dreaded toppie and that will usually happen on the side that is not my usual unclip side. I can feel that i get close to unclipping, but it doesn' t happen (you mentioned awkward movement) and well we don' t need to talk about details.
    i got myself an ergon tp-1 to help replicate the position of my cleats quicker and like i said before, i' m happy with the comfort, so i don' t worry about not being able to setup the grey cleats.
    i feel, as long as the bio-mechanical position is the same, the time to exit and the effort to exit should be reduced. I' ve ridden this season with the red cleats, they are nearing the time to needing replacement, so i will try them out. I don' t see why i would ever need to be dialed-in 100% to use 0% deflection.
    i' m really enjoying your videos. Keep up the nice work
    .
    ...Expand
  • @
    @helicart3 years ago Cyclists tend to feel more comfortable decleating for stopping on their dominant leg side.
    however, it is safer to decleat to the outside of the this is to keep as much distance as possible between traffic and your body/limbs.
    in australia, in a big group ride 40+ riders, it is interesting to see at least 90% decleat to the left, despite only 10% of people being left dominant.
    so one can train themselves to do what is opposite their body' s natural preference, for the sake of safety.
    as an aside, some people think they are ambipedal (use right and left legs equally) this is easily disproven by getting them to cycle in ever smaller circles, to the left, then to the right. Unless one trains for years, they will do smaller circles to their dominant side
    .
    ...Expand
  • @
    @RXP9110 months ago I tried to get used to clipless so I could have an easy to install power meter. I hated them. After finding out they provide no more efficiency than flats (see evidence here: I went back to flats. I really like the ability to reposition your foot on climbs and obviously being able to walk around normally! .. ...Expand
  • @
    @misterscagnetti3 years ago Hi federico, great content, keep it up. Im preparing a video on giessegi italian cycling kit, any pointers on how to pronounce that word please? Id be very grateful, thank you. 1
  • @
    @CTINF3 years ago Hi federico, just curiosity where are you located?
  • @
    @tongotongo31432 years ago Feet clipped in, poor control drop bar handlebars, fast bicycle on narrow tires, intensive traffic - all things together is like a recipe for a tragic accident or at least unpleasant problems on the road. 1
  • @
    @govermentsoundsystemrootik8887last year I couldn' t even tell you when i started to use spd' s sl but it seems like a lifetime ago & the actual peddles that i been useing for the past . ...Expand
  • @
    @stuartfreedman68543 years ago When i walk, my right foot tends to point outward a little. It is important to pay attention to and follow your natural foot position. When a shop placed . ...Expand 6
  • @
    @HomiesOfMarslast year Just installed some clipless pedals today. I spent a good few months with the bike without them to learn how to always be in balance on the bike as its i think the biggest tip here is always using one side to stop on, and be carefuly to not tip over to the other side when you start off again! Note: i already have a gash in my shin lol. ...Expand
  • @
    @kwameakom26253 years ago Thanks for the advice federico, i met you a few days ago, funilly enough the last few days i have been researching getting clipless myself for better power . ...Expand 1
  • @
    @pcmjpcmj68543 years ago Good video and advice. When i started cycling again after a few decades off the bike things had changed dramatically. I bought the whole of bike, helmet, clothing, tools, saddle, shoes, pedals, cleats etc from a well known bike shop. I think it contained a lot of end of line items as it seemed quite a good deal. People told me it would take some time to get used to clipping in and out of the pedals. For the first few weeks i was falling every time i had to stop. Once i was clipped in i could not get my foot out of the pedal despite backing off the tension in the pedal. Eventually after many cuts, bruises and scrapes i realised that the cleats and pedal were not compatable with each other! Got some different cleats and bravo, everything was fine. The bike shop apologised but i could have been seriously injured. ...Expand
  • @
    @trevorhawk20003 years ago Thanks for the advice, i have been riding my cyclecross bike with mtb spd cleats for the past couple of years but now have a new bike on order so going . ...Expand
  • @
    @zennor_man3 years ago Thanks federico. It took me 3 embarrassing topples before i became accustomed to clipless pedals (i' m a slow learner) i use the same procedure as . ...Expand
  • @
    @millerprj3 years ago Being new to clipless myself, i would suggest practicing on both sides as much as possible. Only because i found myself tipping to my not usual side and . ...Expand 2
  • @
    @keeksputels18513 years ago I' ve never used road cleats for road bikes as i like my shoes to fit my gravel and mtb. Plus its much easier to clip in a standing start sprint as . ...Expand
  • @
    @jimbrittain4023 years ago I find that all of us, when we first get the clipless pedals, have the occasions when we go over because we" clip out" it' s part of the learning; it happens to all of us. And the injury is almost always more to our dignity than it is to our body. I' m exceptionally klutzy, and still manage to go over every two or three years or so; my more coordinated and graceful associates and club members have gotten past that experience. ...Expand
  • @
    @emailForDye3 years ago I remember you talking about circular stroke on the bike in another video and now i' ve come across this video, which will complement that video very i don' t use the shimano system, but rather the look keo system. Look also uses colour coding, but i' m considering something and i would like your opinion on this. I have my cleats in a very good position at the moment, and i' m using the equivalent of shimano' s yellow.
    here are the angles of freedom: 0, 4, 5 or 9 (black, grey or red)lt; i use red
    i feel that the amount of effort to get out of the cleats is high at times and i' m planning on testing the grey ones soon, which should allow me to unclip a little bit sooner. I fear the dreaded toppie and that will usually happen on the side that is not my usual unclip side. I can feel that i get close to unclipping, but it doesn' t happen (you mentioned awkward movement) and well we don' t need to talk about details.
    i got myself an ergon tp-1 to help replicate the position of my cleats quicker and like i said before, i' m happy with the comfort, so i don' t worry about not being able to setup the grey cleats.
    i feel, as long as the bio-mechanical position is the same, the time to exit and the effort to exit should be reduced. I' ve ridden this season with the red cleats, they are nearing the time to needing replacement, so i will try them out. I don' t see why i would ever need to be dialed-in 100% to use 0% deflection.
    i' m really enjoying your videos. Keep up the nice work
    .
    ...Expand
  • @
    @helicart3 years ago Cyclists tend to feel more comfortable decleating for stopping on their dominant leg side.
    however, it is safer to decleat to the outside of the this is to keep as much distance as possible between traffic and your body/limbs.
    in australia, in a big group ride 40+ riders, it is interesting to see at least 90% decleat to the left, despite only 10% of people being left dominant.
    so one can train themselves to do what is opposite their body' s natural preference, for the sake of safety.
    as an aside, some people think they are ambipedal (use right and left legs equally) this is easily disproven by getting them to cycle in ever smaller circles, to the left, then to the right. Unless one trains for years, they will do smaller circles to their dominant side
    .
    ...Expand
  • @
    @RXP9110 months ago I tried to get used to clipless so I could have an easy to install power meter. I hated them. After finding out they provide no more efficiency than flats (see evidence here: I went back to flats. I really like the ability to reposition your foot on climbs and obviously being able to walk around normally! .. ...Expand
  • @
    @govermentsoundsystemrootik8887last year I couldn' t even tell you when i started to use spd' s sl but it seems like a lifetime ago & the actual peddles that i been useing for the past . ...Expand